I am having an issue regarding displaying values in the mobile app that i've created using MIT everything works fine, the values displays perfectly and accurately but the error keeps popping up that List Index too large, i am sharing the screenshots here hopefully i get my issue resolve plus i'll be sharing my aia file if any one could please help me with the issue that would be very grateful Thanks in advance..
Having an error named "select list item: List index too large". I am unable to resolve the issue as i've tried so many different methods but of no use hopefully i get my issue resolved
AIO_PANEL_copy.aia (461.3 KB)
hre's the aia file
here's the code , the original code is too big as it is a part of a project so i am just sharing the code where i transmitted the values from bt
Be sure to use println() at the end of each message to send from the sending device, to signal end of message. Do not rely on timing for this, which is unreliable.
In the AI2 Designer, set the Delimiter attribute of the BlueTooth Client component to 10 to recognize the End of Line character.
Also, return data is not immediately available after sending a request,
you have to start a Clock Timer repeating and watch for its arrival in the Clock Timer event. The repeat rate of the Clock Timer should be faster than the transmission rate in the sending device, to not flood the AI2 buffers.
In your Clock Timer, you should check
Is the BlueTooth Client still Connected? Is Bytes Available > 0? IF Bytes Available > 0 THEN set message var to BT.ReceiveText(-1)
This takes advantage of a special case in the ReceiveText block:
Receive text from the connected Bluetooth device. If numberOfBytes is less than 0, read until a delimiter byte value is received.
If you are sending multiple data values per message separated by | or comma, have your message split into a local or global variable for inspection before trying to select list items from it. Test if (length of list(split list result) >= expected list length) before doing any select list item operations, to avoid taking a long walk on a short pier. This bulletproofing is necessary in case your sending device sneaks in some commentary messages with the data values.
Some people send temperature and humidity in separate messages with distinctive prefixes like "t:" (for temperature) and "h:" (for humidity).
(That's YAML format.)
The AI2 Charts component can recognize these and graph them. See Bluetooth Client Polling Rate - #12 by ABG
To receive YAML format messages, test if the incoming message contains ':' . If true, split it at ':' into a list variable, and find the prefix in item 1 and the value in item 2.
Also, you can use the blue cog to add more local variables. (it looks far cleaner)
Extra advice for your sketch ...
Only use print() in the middle of a message.
Be sure not to println() in the middle of a message, or you will break it into two short messages and mess up the item count after you split the message in AI2.
ok thanks i'll try it and let you know if it works for me or not