Mi app no muestra correctamente los datos enviados

Hola a todos, espero puedan apoyarme con este incoveniente en mi proyecto, es la primera vez que utilizo app inventor.
estoy realizando una app para mostrar la cantidad de pulsos que recibe un boton fisico. pero al enviar la informacion a la app solo muestra "??" ya estuve cambiando los bloques y el codigo de arduino. pero no logro generar cambios.

Captura de pantalla 2022-12-26 005331

Hello user, your blocks are not readable. Please right-click in your Blocks workspace and select "Download Blocks as PNG", then upload it here. Thank you.

Holaaaa. muchas gracias.

Topic has been included with appropriate tags for better response.

1 Like

Have you tried using the Web.UriDecode block to decode the response, then setting the decoded response into the label?

1 Like

hola, no he utilizado ese bloque y desconozco para que sirve, sin embargo si requiero que sea a través de Bluetooth. Voy a investigar el bloque muchas gracias.

Could you show us the AI2 Designer Bluetooth Client Attributes?

Besides that, here is standard advice for BlueTooth Delimiters:

Please see the Delimiter article in FAQ

Be sure to use println() at the end of each message to send from the sending device, to signal end of message. Do not rely on timing for this, which is unreliable.

In the AI2 Designer, set the Delimiter attribute of the BlueTooth Client component to 10 to recognize the End of Line character.
Also, return data is not immediately available after sending a request,
you have to start a Clock Timer repeating and watch for its arrival in the Clock Timer event. The repeat rate of the Clock Timer should be faster than the transmission rate in the sending device, to not flood the AI2 buffers.

In your Clock Timer, you should check

  Is the BlueTooth Client still Connected?
  Is Bytes Available > 0?
     IF Bytes Available > 0 THEN
       set message var  to BT.ReceiveText(-1) 

This takes advantage of a special case in the ReceiveText block:

Receive text from the connected Bluetooth device. If numberOfBytes is less than 0, read until a delimiter byte value is received.

If you are sending multiple data values per message separated by | or comma, have your message split into a local or global variable for inspection before trying to select list items from it. Test if (length of list(split list result) >= expected list length) before doing any select list item operations, to avoid taking a long walk on a short pier. This bulletproofing is necessary in case your sending device sneaks in some commentary messages with the data values.