[PAID] IMAPClient: Extension to read emails from IMAP server [$6 or INR 350]

vknow360 · April 26, 2021, 2:22pm

1.Introduction

Description: This extension can be used to read emails from imap server.Although it is primarily for reading emails but some minor writing is also supported.
Latest Version: 2
Released: 2021-04-25T18:30:00Z
Last Updated: 2024-01-28T18:30:00Z

2.Blocks

3.Documentation

Events

Connected	Event raised after connection successful with server
Disconnected	Event raised when disconnected from server
FolderStateChanged	Event raised when currently opened folder's state changes _{state \| text}
ReceivedNotification	Event raised when server send a notification This does not indicate new messages _{type \| number message \| text}
GotError	Event raised when error occurs _{methodName \| text errorMessage \| text}
GotSubjectList	Event raised after getting subjects list _{subjectList \| list}
RetrievedMessages	Event raised after retrieving messages
GotMessageInfo	Event raised after getting message info as dictionary _{infoDictionary \| dictionary}
ReceivedNewMessage	Event raised after getting new messages _{id \| number}
GotFoldersList	Event raised after getting folders list _{list \| list}
GotFlagsList	Event raised after getting flags list _{flagsList \| list}
Closed	Event raised when server closes the connection
GotSearchResult	Event raised after getting search result. Returns a list of ids which can be used to retrieve message using GetMessageInfo function. _{resultsList \| list}
GotUnreadMessages	Event raised after getting unread messages. Returns a list of ids which can be used to retrieve message using GetMessageInfo function. _{resultsList \| list}

Methods

MessagesCount	Returns messages count from folder which is currently open.
IsConnected	Returns true if currently connected to server
Connect	Tries to connect to the server _{host \| text port \| number protocol \| text userName \| text password \| text}
Disconnect	Closes opened folder and then disconnects from server
GetFoldersList	Tries to get list of folders with given filter Possible Filters: empty text , * , % _{filter \| text}
OpenFolder	Tries to open folder with given mode and triggers FolderStateChanged event if successful _{folderName \| text mode \| number}
CloseFolder	Closes currently opened folder
GetSubjectList	Gets subject's list within range from = 0 and to = 0 means all message's subjects will be retrieved _{from \| number to \| number}
RetrieveMessages	Retrieves messages within given range _{from \| number to \| number}
SetFlag	Sets flag on given message _{id \| number flag \| number}
GetMessageFlags	Tries to get given message's flags Useful if you want to filter messages using flags _{id \| number}
GetMessageInfo	Gets given message's information _{id \| number}
Search	Search messages using various filters like range (ex: 1;10 will search in messages between first and tenth message from starting. If set to 0 then searched in all messages.) _{range \| text term \| text inSubject \| boolean inFrom \| boolean inContent \| boolean}
GetUnreadMessages	Gets all unread messages in the specified range (in format 1;10) _{range \| text}

Properties

StoreType	Property Type : write-only Accepts : text
ReadOnly	Property Type : read-only Accepts : number
ReadWrite	Property Type : read-only Accepts : number
FlagDeleted	Property Type : read-only Accepts : number
FlagSeen	Property Type : read-only Accepts : number
FlagRecent	Property Type : read-only Accepts : number
FlagDraft	Property Type : read-only Accepts : number
FlagAnswered	Property Type : read-only Accepts : number
FlagUser	Property Type : read-only Accepts : number
DownloadAttachments	Property Type : read-write Accepts : boolean

4.Buy

UPI: vknow360@apl
Thank you.

5.ChangeLog

Version 1.1

Fixed bug in GetFolderList which was returning an appended list of folders

ChangeLog v2

Hope it helps!

Know_About_IT · May 15, 2021, 2:38am

Nice extension @vknow360

Salvatore_Giunta · July 7, 2021, 4:19am

Where to buy?

volume_up
13 / 5000
Risultati della traduzione
where to buy

vknow360 · July 7, 2021, 4:32am

You should have received the mail.

Salvatore_Giunta · July 9, 2021, 10:56pm

vknow360 · July 10, 2021, 12:37am

Actually, first you will have to select the folder from list and then click on OpenFolder.
After that you can get messages.
Flow should be like this:
Connect
Get Folders list
Open Folder
Get Subject List
Open that specific message
Get the message info

One thing you should note that only messages which have been retrieved can be opened.
So you need to retrieve subject list and messages alternately.

Salvatore_Giunta · July 10, 2021, 6:20am

Ok, the email is raw email.

vknow360 · July 10, 2021, 6:23am

Message Info is a dictionary and body can be html.

vknow360 · July 10, 2021, 9:02am

You just missed commission of PayPal.

bernat_bernat · October 28, 2021, 12:47am

Please, I've tryed this test apk, and once I introduce the connection details, it apparently works when I click on the "Connect" botton (it appears the "+OK POP3 ready"), but after that, when I click on the "Folder List" botton, the "Not connected" message appears... Am I doing something wrong?
Thank you in advance.

vknow360 · October 28, 2021, 3:25am

This should not appear as extension uses IMAP and not POP3.
Can you show a video of error?

bernat_bernat · October 28, 2021, 8:36am

Thank you for your interest.

I've finally solved the problem (I wasn't working with the right details to connect). Sorry for that.

The thing is that an error window appears now when I click on the "Getlist" button (I've previously chosen the folder, and the app is able to count the number of messages, so I think everything is working properly at that time). The error window says:

"Select list item: List index too large
Select list item: Attempt to get item number 2 of a list of length 1:[""]"

This is the screenshot:

Can you please help me with that?

Thank you again!

vknow360 · October 29, 2021, 11:38am

After selecting folder you need to list subjects first, for that you need to define a range such as 1 to 50 in the textbox as 1;50 only then you should call GetSList.
I think you should buy the extension to learn more about its usage.

However, test apk is no longer available.

bernat_bernat · October 29, 2021, 1:47pm

Thank you!

Ok. I agree. Please, let me know how to buy it.

vknow360 · November 4, 2021, 6:09am

ChangeLog Version 1.1

Fixed bug in GetFolderList which was returning an appended list of folders
Reported by @bernat_bernat

Salvatore_Giunta · February 14, 2022, 8:23am

Hi, please. How do can body be html?

bernat_bernat · February 26, 2022, 11:29pm

Hello!
I don't know why, but although I've tryed many combinations to make it work,I was unable to create an apk where TaifunMail (to send emails) and IMAPClient (to read emails) can work together. They work fine together under Companion, but once you try to create an apk, App Inventor is unable to compile the project, and an error message appears.

Any suggestion?

Thank you!

Bernat.

vknow360 · February 27, 2022, 12:57am

There is a no-deps version also there.
However, I can't assure its compatibility with other extensions.
Why not try this? (compatible)

bernat_bernat · February 27, 2022, 11:12am

Thank you.
I've tried again.... And it happens the same: it works fine under Companion, but unable to compile the project.

I'll appreciate any suggestion you can provide.

Please, can you please create a quick draft app (and its .apk) with those two extensions to make sure they can work together?

Thank you again.

vknow360 · February 27, 2022, 12:15pm

Did you use this aix?