[Extension] Dynamic graph. Shift left graph. Sinusoidal wave. Bluetooth

[jgh_jkhg]

that 3 variable is awesome not only because of the 3 variables but because of its Min/Max capability .. it is REALY AWESOME ..

• would you please do the same for the TWO variables one ? (like min-max for 2 variables) ..
• i tried to use the 3 variables with only two variables leaving the 3rd blank but it did not work,
• please make the 2 var with min/max like the 3 one as well...

APPRICATED Awesome man

[Juan_Antonio]

Using the UpdateGraph3 block, you can display one, two, or three variables.
If you set a color to 16774127, it will be transparent.

[jgh_jkhg]

hello,
using UpdateGraph3 with 1 or 2 variable while the 3rd is transparent cause lags in slow response , i thought if you can update UpdateGraph2 to have min/max like what you did with UpdateGraph3 then it will be great in not using useless memory and processing time for a transparent .. can you please update UpdateGraph2 to have min/max?

• Your graph extension is a great advance to mit app inv

[Juan_Antonio]

@jgh_jkhg

cause lags in slow response

What happens when you repeat the valor2 as indicated in the image?

[jgh_jkhg]

when i use DynamicGraph2 >> no issue except i have to kepp bith val1,val2 at same min/max . (my val1 max is 1000 while val2 max is 25) >> i have to map it to read it on graph but no lag issue.

• when i use DynamicGraph3 with 2 variables as 2=3 or as 3 color 16774127 >> keeps freezing and lagging on/off .. (when i use 3 DIFFERENT variables ) i get same lag soi believe my cell is not up to 3 variables .. i wish your DynamicGraph2 extension has min/max as well instead to use extra DynamicGraph3 resources (3 var to plot 2) .. than you

[jgh_jkhg]

fyi i am plotting ECG like - so Esp32 sents every 100 ms and mitapp clock at 75 ms

[Juan_Antonio]

How does the ESP32 send the information, by classic Bluetooth, by BLE, by FireBase, by WiFi?

[jgh_jkhg]

by classic Bluetooth
mit app: clock >> 120 ms

• dynamic.graph resolution > 10 ms
  Bluetooth pooling rate >> 10 ms

• esp32 to bluetooth 200 ms

[Juan_Antonio]

Here an example with ESP32 and classic Bluetooth.

4.- ESP32 sends by classic Bluetooth, two random numbers to the app, they are displayed in a graph.

ESP32 Bluetooth classic. Callback. ESP32 CAM

4.- Esp32 sends by classic Bluetooth, two random numbers to the app, they are displayed in a graph. p62D_esp32_bluetooth_5.aia (16.5 KB) [esp32_bluetooth13] [esp32_bluetooth11] ESP32 Code. // Juan A. Villalpando. // http://kio4.com/arduino/180_Wemos_Bluetooth_LED_Pulsadores.htm #include "BluetoothSerial.h" #if !defined(CONFIG_BT_ENABLED) || !defined(CONFIG_BLUEDROID_ENABLED) #error Bluetooth no activado! Activa la conexion Bluetooth. #endif BluetoothSerial SerialBT; int alea_1; int al…

[jgh_jkhg]

thank you ,
this is what i am at now already ..

• Would you please create with only 2 variables with min/max

[Juan_Antonio]

@jgh_jkhg

dedicated 2 variable

I have added the block with two graphics.
http://kio4.com/appinventor/299H_extension_GraficoDinamico.htm

[jgh_jkhg]

you are as awesome as usual ..
fyi , no lagging or cutting and pausing in my graph anymore with 2 var extension. be blessed

[jgh_jkhg]

your HELP is needed please.

• to freeze the graph >> you said disable the clock .. ok ,, but to resume the graph again with diabled clock ! .. ? .. so would you please add a new control as KIO4_DynamicGraph1.PAUSE=true/false ..etc.
• i need the clock to keep running all the time for other processes to keep running .. only graph need to be stopped while clock always running .. are you able please?

thank you so much ..

[Juan_Antonio]

Set another Clock.

[zy_wang]

Hi, this is brilliant, but is there any way to plot the values of multiple potentiometers using Bluetooth?

[Juan_Antonio]

@zy_wang

multiple potentiometers using Bluetooth

Bluetooth HC-06. Arduino. Send. Receive. Send text file. Multitouch. Image

7.- App gets the value of two potentiometers. p9A0i_bluetooth_potenciometro.aia (3.3 KB) [bt_20] [bt_21] // Juan A. Villalpando // http://kio4.com/appinventor/9A0_Resumen_Bluetooth.htm int value_pot0; int value_pot1; String value; void setup() { Serial.begin(9600); } void loop() { value_pot0 = analogRead(A0); value_pot1 = analogRead(A1); value = (String) value_pot0 + "," + (String) value_pot1; Serial.println(value); delay(200); // It should be slower than the Cl…

Bluetooth HC-06. Arduino. Send. Receive. Send text file. Multitouch. Image

9.- A potentiometer in Arduino sends values ​​to the App. Dynamic graph. Shift left. Here similar example. p9A0i_bluetooth_dinamico.aia (8.1 KB) [bt_24] [bt_25] // Juan A. Villalpando // http://kio4.com/appinventor/9A0_Resumen_Bluetooth.htm int value_pot0; void setup() { Serial.begin(9600); } void loop() { value_pot0 = analogRead(A0); Serial.println(value_pot0); delay(100); // It should be slower than the Clock Interval. }

[zy_wang]

That's very helpful thank you! I also have another question. I was hoping to find the peak value of the graph drawn, however, the get max value block seems to only print the upper range of the graph and not the peak of the graph produced. Is there a way to get the peak value? Thank you

[Juan_Antonio]

If you want to get the maximum value returned, you should create a code for it. The MaxValue block displays the maximum value configured on the chart.

[ABG]

Here's how to capture max(y values) from a list of (x,y) pairs.

If you only save y values, just use the max in list block.

[zy_wang]

Hi,

Thank you for replying. This looks like its an imported list however, and its picking out the larges value from pairs of values. I think I'm looking for something more dynamic as I am streaming in data. I wanted to compare the max value to the incoming value, so if the max value is smaller than the incoming streamed value then it would update to the new value, but if it is less, it would remain at the maximum value.

I was using the if/then blocks and managed to get the max value to update with the streamed in data, but I'm having trouble keeping the max value the same if the stream data is less than the max value (the max value increases and decreases with the streamed values).

Thank you